In many common 48×40 GMA pallet configurations, the pallet is built with upper deck boards, lower deck boards, supporting stringers, fasteners, and notches that provide access for material-handling equipment. Each component contributes to how the pallet supports a product, distributes weight, and moves through warehouses, manufacturing facilities, loading docks, and distribution environments.
Although the 48×40-inch footprint is widely recognized, pallet dimensions alone do not determine whether a pallet is appropriate for a particular load. Construction can vary depending on the supplier, material, condition, intended application, customer requirements, and handling environment.
Deck board thickness, board spacing, stringer condition, fastener placement, product dimensions, weight distribution, storage method, and equipment compatibility may all affect pallet performance. Buyers should therefore confirm the exact pallet specification for their operation instead of assuming that every 48×40 pallet is built or performs in the same way.
Understanding basic GMA pallet anatomy can help purchasing managers, warehouse teams, and logistics professionals communicate more clearly with their pallet supplier. It can also help businesses identify visible damage, review product fit, and determine when a standard GMA pallet or another pallet design may be more appropriate.

What Is a 48×40 GMA Pallet?
A GMA pallet is a commonly recognized wood pallet format with a footprint measuring approximately 48 inches by 40 inches. The term “GMA pallet” is still widely used in pallet purchasing, warehousing, shipping, and distribution conversations.
The familiar footprint allows many businesses to coordinate palletized products with warehouse layouts, packaging patterns, forklifts, pallet jacks, trailers, storage systems, and receiving procedures. However, the use of a common footprint does not mean every pallet has the same construction, condition, capacity, or handling characteristics.
Depending on the required specification, a 48×40 GMA pallet may be manufactured using new lumber, recovered lumber, or a combination of materials. Components may also vary in width, thickness, spacing, fastening method, and condition.
Demcor Inc. provides standard GMA pallets along with reconditioned and recycled pallet options. The company also offers combo pallets, which may incorporate both new and reconditioned material depending on the required product and application.
Businesses should discuss their product, handling equipment, storage conditions, receiving requirements, and expected pallet use with a supplier before selecting a specific pallet configuration.
Understanding Pallet Orientation
Recognizing the orientation of a stringer-style pallet makes its components and entry points easier to understand.
In many common GMA pallet designs, long supporting components called stringers run beneath the deck boards. The deck boards are positioned across those stringers to create the upper and lower surfaces of the pallet.
This arrangement creates different entry conditions depending on the direction from which a forklift or pallet jack approaches. Two sides may provide open access between the stringers, while the other two sides may depend on notches cut into the stringers.
Because construction can vary, businesses should confirm the orientation and entry design of the specific pallet they are purchasing. This is particularly important when pallets must interact with conveyors, pallet dispensers, automated equipment, forklifts, or pallet jacks with limited clearance.
Top Deck Boards Support the Product
Top deck boards create the upper surface on which products are placed. Depending on the operation, the load may consist of boxes, bags, containers, drums, manufactured components, packaged materials, or other goods.
The number, thickness, width, condition, and spacing of the top deck boards may influence how well the pallet supports the product. Different pallet specifications can use different deck board arrangements, which is why buyers should confirm the exact build rather than relying on a general description of a GMA pallet.
A product with a broad and rigid base may distribute weight differently than a flexible bag, small carton, pail, machine component, or product with narrow contact points. If large portions of a product rest above the spaces between deck boards, some areas may receive less direct support.
The appropriate deck board arrangement depends on the product footprint, packaging design, total weight, weight concentration, and expected handling conditions. A pallet supplier may need to review these factors when a standard configuration does not provide the required support.
Businesses should also consider whether the product fits within the pallet footprint. Significant overhang can expose packaging to contact with surrounding freight, warehouse structures, or handling equipment. Excessive underhang, where the product covers only a small portion of the pallet, can also result in inefficient space use or uneven weight distribution.
Lead Boards Form the Outer Edges
The deck boards positioned along the outer edges of a pallet are commonly called lead boards. These boards may be the first pallet components contacted by forklift tines, dock surfaces, conveyors, nearby pallets, and other material-handling equipment.
Because of their location, lead boards may experience repeated impacts during loading, unloading, repositioning, and storage. Their condition can therefore affect how easily the pallet is handled.
A damaged lead board does not always mean the rest of the pallet is unusable, but it should be inspected. Splits, looseness, missing sections, raised fasteners, or separation from the supporting structure may interfere with handling or affect the product above it.
When evaluating a pallet, warehouse teams should look beyond general appearance and examine whether the outer boards remain securely attached and suitable for the intended application.
Stringers Create the Supporting Framework
Stringers are long structural components positioned beneath the deck boards in a stringer-style pallet. In many common configurations, stringers run along the length of the pallet and help connect its upper and lower sections.
The stringers support the deck boards and help transfer the product’s weight through the pallet. Depending on how the pallet is being used, that weight may be transferred to the floor, forklift tines, another pallet, a conveyor, or a storage system.
Stringer dimensions and construction can vary according to the pallet specification. Their condition also matters. Cracks, splits, missing wood, damaged notches, or previous repairs may affect how the pallet should be evaluated for continued use.
The presence of a repair does not automatically make a pallet unsuitable. Reconditioned pallets are intended to extend the usefulness of wood pallet materials by inspecting pallets and repairing components when appropriate. However, the repaired pallet still needs to be suitable for the product, equipment, and handling environment in which it will be used.
Demcor Inc. offers reconditioned and recycled pallet options as part of its approved services. Businesses considering these pallets should communicate their operational requirements so the selected pallet type fits the intended application.
What Are Stringer Notches?
A stringer notch is an opening cut into a supporting stringer. Depending on the pallet design, these notches can allow forklift tines to approach the pallet from directions that would otherwise be blocked by solid stringers.
In many common notched-stringer pallet configurations, the open ends provide direct access between the stringers. Side entry is provided through notches cut into those stringers.
This design is commonly discussed as providing access from four directions. However, the amount and type of access can vary depending on the pallet specification, notch dimensions, bottom deck arrangement, fork spacing, tine thickness, and equipment being used.
For this reason, businesses should avoid assuming that every notched pallet will work with every forklift, pallet jack, conveyor, or automated handling system. The exact pallet and equipment specifications should be reviewed together.
Notches can also experience handling stress. If a notch is cracked, obstructed, or missing a significant amount of wood, the pallet should be evaluated before use. Operators should not force forklift tines into an opening that does not provide adequate clearance.
Open-End and Notched-Side Entry
A common stringer pallet may provide two different types of entry.
Open-End Entry
Open-end entry occurs when equipment approaches through the spaces between the stringers. Because the forks do not need to pass through cutouts in the stringers, this direction may offer a more open entry path.
However, actual clearance still depends on the pallet’s construction, the bottom deck board arrangement, the product load, and the dimensions of the handling equipment.
Notched-Side Entry
Notched-side entry occurs when forklift tines pass through openings cut into the stringers. Because these openings are more limited than the open ends, the equipment must be positioned correctly.
Fork spacing, tine thickness, notch condition, and load placement may all affect whether side entry is practical. Businesses should confirm side-entry compatibility when pallets will regularly be approached from several directions.
Forklift Entry and Pallet Jack Entry Are Not Always the Same
A pallet that can be entered from the side by a forklift may not provide the same level of access for every pallet jack.
Forklift tines lift a pallet differently from pallet jack forks, which include wheels that must travel beneath and through parts of the pallet. The position of the bottom deck boards, available clearance, wheel dimensions, fork length, and entry direction can all affect pallet jack movement.
Depending on the pallet and equipment design, certain entry directions may be easier than others. This is why terms such as “four-way entry” should not be interpreted as a guarantee that every material-handling device can enter equally from all four sides.
Businesses should identify the equipment that will handle the pallets before ordering. Useful information may include:
- Fork width and thickness
- Distance between forks
- Pallet jack wheel placement
- Conveyor clearance
- Pallet dispenser requirements
- Automated handling tolerances
- Preferred entry direction
Providing these details can help a pallet supplier determine whether a common GMA configuration is suitable or whether a different construction should be considered.
Bottom Deck Boards Support Stability
Bottom deck boards form the lower portion of the pallet. They help connect the supporting stringers and influence how the pallet rests on the floor, equipment, storage surface, or another unit load.
Bottom deck construction can vary depending on the pallet specification. Some pallets may use a different number, width, thickness, or arrangement of boards than others.
Although the bottom surface is less visible after a pallet has been loaded, its condition should not be overlooked. A loose or broken bottom board may catch on warehouse flooring, pallet jack wheels, conveyor components, or other handling equipment.
Missing boards or raised fasteners may also change the way the pallet rests on a surface. Any visible damage underneath the pallet should be considered during inspection.
Some pallet designs may include beveled or chamfered board edges to support certain handling movements. Whether this feature is needed depends on the pallet design and the equipment being used. Buyers should confirm the exact construction if pallet jack or automated equipment compatibility is important.
Fasteners Connect the Pallet Components
Fasteners hold the deck boards and stringers together so the pallet can function as one assembled structure.
Fastener type, position, depth, and condition can vary depending on the pallet design and manufacturing specifications. Rather than assuming that all pallets use the same fastening pattern, businesses should focus on whether the boards remain securely connected and suitable for the intended use.
Visible concerns may include raised nail heads, exposed points, missing fasteners, loose boards, or areas where the wood has separated from the supporting structure.
These conditions may affect more than appearance. A protruding fastener can catch stretch wrap, puncture packaging, scratch a product, interfere with equipment, or create a sharp contact point during handling.
Any pallet showing significant fastener or connection problems should be set aside for evaluation rather than returned automatically to circulation.
How Pallet Components Work Together
The components of a pallet should be evaluated as one connected structure.
The product rests on the upper deck. The deck boards transfer the load to the supporting stringers. The stringers and bottom deck then carry that weight to the floor, equipment, storage system, or other support beneath the pallet.
How the weight moves through the pallet depends on the product and how it is arranged. A load distributed across most of the deck creates different conditions than a dense piece of equipment or container that places most of its weight in one small area.
The pallet may also experience different forces depending on whether it is stationary on a floor, being lifted by a forklift, transported through a warehouse, stacked, or supported in a rack.
For these reasons, businesses should not assign one universal load capacity to every 48×40 pallet. Capacity and suitability depend on the exact pallet construction, lumber condition, fastening method, product weight, weight distribution, support conditions, and handling process.
A capacity or performance statement associated with one pallet design should not automatically be applied to another new, used, repaired, or custom pallet. Buyers should confirm the requirements of their specific application with their supplier.

New, Reconditioned, and Combo Pallets
Businesses may use the same general pallet footprint while selecting different material and condition options.
A new pallet is manufactured using new lumber. It may be selected when the application requires a particular appearance, component specification, or construction preference.
A reconditioned pallet contains usable material from previously circulated pallets. Components may be inspected and repaired as appropriate before the pallet returns to service.
A combo pallet may use a combination of new and reconditioned lumber. The exact arrangement depends on the pallet design and customer requirements.
Demcor Inc. provides standard GMA pallets, reconditioned and recycled pallets, and combo pallets. The appropriate option depends on the product, handling environment, receiving requirements, appearance expectations, pallet quantities, and operational goals.
Rather than assuming one construction is best for every customer, buyers should discuss how the pallet will be used and what requirements must be met.
What to Look for During a Pallet Inspection
A pallet inspection should include the upper deck, supporting structure, entry points, lower deck, and visible fasteners.
Conditions that may require further evaluation include broken or missing deck boards, loose outer boards, cracked stringers, damaged notches, unstable bottom boards, raised nails, exposed fastener points, significant distortion, or deterioration.
Moisture, contamination, and visible material attached to the pallet may also need to be considered depending on the product and facility.
Inspection standards should reflect the actual operation. A pallet used for short internal movement may have different requirements from one entering an automated warehouse, supporting a concentrated load, moving through multiple distribution points, or being delivered to a customer with a written pallet specification.
When there is uncertainty about a pallet’s condition, the safest operational step is to remove it temporarily from circulation and have it evaluated according to the business’s pallet-handling procedures.
When a Standard GMA Pallet May Not Fit the Application
The 48×40 GMA footprint is widely used, but a standard pallet is not automatically the correct choice for every product.
A different or custom pallet design may be appropriate when the product:
- Extends significantly beyond the pallet edges
- Uses only a small portion of the pallet surface
- Concentrates substantial weight in one area
- Requires different deck board spacing
- Needs alternative entry access
- Interacts with specialized equipment
- Must meet a customer-specific pallet specification
Storage conditions should also be considered. Pallets used in racks may be supported differently from pallets placed directly on the floor. The direction and location of support can influence how the pallet and product load behave.
Automated systems may require consistent pallet dimensions, board locations, entry clearances, and overall condition. Variations that do not cause difficulties during manual forklift handling may still interrupt conveyors, pallet dispensers, sensors, or automated equipment.
The key question is not simply whether the pallet has a standard footprint. It is whether the complete pallet specification fits the product, equipment, storage method, handling process, and receiving requirements.
Information to Provide When Requesting GMA Pallets
Clear information helps a pallet supplier understand the application and determine whether a common GMA pallet configuration may be suitable.
Buyers should be prepared to provide details such as:
- Product length, width, and height
- Total load weight
- Areas where weight is concentrated
- Packaging type
- Product arrangement on the pallet
- Required pallet quantity
- Forklift or pallet jack information
- Conveyor or automated system requirements
- Storage and racking conditions
- Customer receiving specifications
- Preference for new, reconditioned, or combo pallets
- Whether pallets will be reused
Businesses should also confirm whether the receiving customer has written pallet requirements. Reviewing those requirements before ordering can help reduce the risk of encountering issues or specification changes later.
For reusable pallet programs, it may also be helpful to discuss inspection procedures, expected handling cycles, repair criteria, and the conditions under which pallets are removed from service.
Understand the Pallet Before Selecting the Specification
Deck boards, stringers, notches, fasteners, and entry points all contribute to how a pallet supports and moves a product. Understanding these components can help businesses communicate more effectively with suppliers, evaluate pallet condition, and recognize when a standard configuration may not fit the application.
Exact pallet construction can vary. Businesses should confirm the required specification based on the product, handling equipment, storage environment, receiving requirements, and expected use.
Discuss Your Pallet Requirements With Demcor
Founded in 2011, Demcor Inc. is a family-owned pallet manufacturing and recycling business based in Newport, Tennessee. The company provides standard GMA pallets, reconditioned and recycled pallets, heat-treated pallets, custom-designed pallets, combo pallets, block pallets, and crates.
Demcor Inc. works with businesses that need pallet solutions aligned with their operational requirements. Contact Demcor Inc. to discuss your product dimensions, pallet quantities, handling environment, and preferred pallet type.
Frequently Asked Questions
What are the main components of a GMA pallet?
In many common stringer-style configurations, the primary components include top deck boards, bottom deck boards, stringers, notches, and fasteners. Exact construction can vary, so buyers should confirm the specification of the pallet they intend to purchase.
What do deck boards do?
Deck boards create the surfaces that support the product and connect to the pallet’s structural components. Their width, thickness, spacing, and condition can affect how the product is supported.
What are pallet stringers?
Stringers are long supporting components positioned beneath the deck boards in a stringer-style pallet. They help connect the pallet structure and transfer weight through the pallet to the supporting surface or handling equipment.
Why do some pallet stringers have notches?
Notches can provide forklift access from directions that would otherwise be blocked by solid stringers. The amount of access depends on the notch dimensions, pallet construction, and equipment being used.
Can every GMA pallet be entered from four directions?
Many notched-stringer pallets are described as allowing access from four directions, but the exact level of access can vary. Buyers should confirm forklift, pallet jack, conveyor, and automated-equipment compatibility for the specific pallet design.
Can a pallet jack enter from the same directions as a forklift?
Not always. Pallet jack wheels must move through or across parts of the bottom deck, so access may depend on wheel placement, bottom board construction, notch dimensions, and available clearance.